electrical safety testing

The pictures shows a mcb that we recently removed from a client’s critical infrastructure premises following on from a fault. The terminations were loose and as a result this caused overheating on the circuit. Fortunately the fault was identified before any serious damage was caused.
This could have quite easily led to the whole distribution board going up in flames, and who knows what the repercussions of that could have been.
So, the moral of the story is, don’t underestimate the benefits of operating a good planned maintenance and inspection programme!
Inspection and test
One good reason for carrying out electrical safety testing on your building. Loose connections found while carrying out electrical safety testing.
Loose connections could cause a fire, this fault would be classed as a C1 Fail Code -Danger Present. Risk of injury. Immediate remedial action required.
The Electricity at Work Regulations 1989-Reg 4(2) state “The need for maintenance to be done to ensure safety”. As such all commercial premises must be electrically tested and certified to ensure they can continue to be used safety.
BS7671 wiring regulations to the latest edition sets out the requirements for all electrical installations in the UK. The Institute of Engineers and Technology (IET) produce guidance notes to enlarge on the wiring regulations and set out guidance on how compliance can be achieved. Guidance Note 3 covers the Inspection & testing of Electrical Installations.
An electrical installation should be periodically inspected by a qualified electrical engineer. ETM (Electrical Test Midlands) are experts in this field and will advise any customer who may be unsure of the periodicity or scope of the Inspection & Test.

For more information on electrical testing please phone us on 01922 710014

Or use our free phone number 0800 066 3227